Electric Fan Install For Vehicles Images. Then use a 8mm socket wrench and remove the 2 bolts holding the fan shroud. Here is where the drivers side shroud bolt is located.
Then use a 8mm socket wrench and remove the 2 bolts holding the fan shroud. This is based on the draw from the fans, if the fans are larger and draw more than 15 amps each, it’s.
With Dual Cooling Fans, There Are Two Methods For Wiring Up The Relay Kit.
Drill the marked area to a ยผโ using a regular drill bit or stepped bit.
Using The Existing Fan โ With The Shroud Removed.
When selecting an electric fan that will work best for your application, you need to first determine the ideal amount of airflow required to meet your cooling capacity.
Start Your Engine And Allow It To Idle And Measure The Voltage Of The Charging System At The Battery.
Images References :
The Smaller Fan (A) Comes Ready Assembled With The Motor In Its Support Bracket.
This will allow you to move the heat source to a place other than the front of the radiator.
Start Your Engine And Allow It To Idle And Measure The Voltage Of The Charging System At The Battery.
Also here is the wiring diagram i used for wiring the electric fan.
When Selecting An Electric Fan That Will Work Best For Your Application, You Need To First Determine The Ideal Amount Of Airflow Required To Meet Your Cooling Capacity.